English
The M line represents a full range of completely automatic lown mowers that work during the day and at night, inside a working area defined by a perimeter cable. This one is fixed to the ground or it’s put underground of up to 10 centimetres of depth. These machines are developed to cut grass with surfaces of up to 3000 square metres. The M line can manage more than one cutting area autonomously. The cutting grass is frequent and it can be set to obtain the greatest grass cutting like a golf course. The machine installed and programmed can manage autonomously the cutting and the recharging.
When the battery needs to be recharged, the robot, following the perimeter cable already installed, goes to the recharging house where it will recharge itself.
When the recharging is completed, the robot starts cutting again the grass on the base of the settings given, without gas emissions. If there is no electricity avaiable or perimeter cable signal, the machine stops itself immediately.
Display:
Once the working time is set up, the robot can cut not only during the day, but also at night and in different areas. Moreover, the display guarantees an immediate control of all the functions..
Rain sensors:
In case of rain, the robot goes to the recharging house and it remains there for a full recharging time.
Self programming (for M480 and M485 models only):
The machine recognises the percentage of the area already cut, optimizing the total surface of 3000 square metres with an homogeneous cut, economizing energy.
Blade modulation:
There is a variation of the blade rpm depending on the detected effort during the cutting.
Intelligent spiral:
The M440, M480 and M485 models are equipped with intelligent spiral. This function activate itself autonomously on the base of the blade effort detected during the cutting. The spiral remains operative until there still is cutting effort, or until the machine bumps into an obstacle, or until it meets a slope higher than 27°, or until it finds the perimeter wire cable. The intelligent spiral is operative for 5 minutes at the most.
Spiral:
The M4 model is equipped with a spiral that is pre-programmed by the manufacturer.
Slopes:
The 2wd traction can help the robot up to slopes of 27°. More than that, the machine stops the blade and changes direction, starting again the blade work.
Safety:
The robots are equipped with active systems such as the grip. Whenever you touch the rear handle, the machine stops the blade immediately. Moreover, the robot is equipped with a protection that prevents the contact with the blade: the blade passive safety system is guaranteed by a shell protection.
Areas management:
The M 4 can cover up to 3 areas, whereas the M440, M480 and M485 models can cover up to 4 areas.
Alarm:
All the models are equipped with a pin code, whereas the M480 and M485 models are equipped with a sound alarm in case of a sudden robot lifting.
The M robot works randomly until the grass is completely cut. If the robot bumps into the perimeter cable or into an obstacle higher than 15 centimeters, it changes direction. It is possible to define with other perimeter cable islands or flowerbeds the areas that should not be cut.
M line
Gallery
