English
The S line represents a new generation of machines for the garden care. Thanks to the new patent technology, it doesn’t need a perimeter installation. It recognises the grassy surface and the obstacles with its sensors that detect the land underneath, changing the direction by itself.
Easy to use as an home appliance, it only needs three hours of recharging in an under cover and dry place to be ready to cut +/- 400 square metres.
The S line model represents the most economical and ecological solution for small gardens. It works in silence and it can manage the cutting also during the night without gas emissions: it’s eco-friendly.
Thanks to its new and unique technology,
the S models ( S 1 and S 14) have the following particular features:
Sensors:
The S models have six sensors inside the frame that detect the grassy surface: if the S model runs into a surface of 30 cm of length without grass, it stops itself. If it runs into a limited area with high grass, the S model comes back for few centimetres and then it starts again the cutting increasing the blade speed rpm.
The S 14 is a model with higher features: in fact they are equipped with drop-off sensors that detect holes and empty spaces. They are positioned in line with the wheels making it easy to change direction before any steps.
Bump sensors:
If the S model bumps into an obstacle of at least 9 cm of height, it comes back and changes direction autonomously.
Self programming:
During the cutting, because of the blade effort detection, the S model recognises the grassy surface already cut. When the robot recognises that all the surface is cut, thanks to the self programming, it stops goes on standby. If you think that the garden requires more work, you can restart the robot by pushing the START button.
Safety:
If you touch an handle, the blade stops itself immediately. If you touch both handles, the machine stops the blade and the wheel engines. If you lift the robot with an inclination above 27°, the S model stops itself.
Drive traction:
The traction is permanently 4wd. Thanks to it, the machine can manage slopes of up to 27°.
Cutting control:
Because of the blade thickness equipment, the cutting height can be chosen between 34 and 40 mm, depending on the grass variety.
The S line represents the maximum of the versatility, it is developed to be movable and used in different areas. Its semplicity of recharging, thanks to two connectors linked by the wheels, makes it versatile and functional as a normal indoor home appliance. It doesn’t need special garden adaptations, but only a few solutions in case of swimming pools without perimeter obstacles lower than 9 cm of height.
S line
Gallery
